This loader has less than 5,000 hours on it but it won't go in to gear. The transmission is an Allison transmission and I do have the manual for it but don't have the knowledge to fix it myself. I am the third owner and the previous owner supposedly works on transmissions and replaced many of the internal parts with new ones before I bought it but now won't stand behind his work. It starts and runs very good and all hydraulics are strong but just has something wrong in the upper side of the tranny. We checked in the lower side and the parts we found were all new, but the trouble seems to be on the top side. I put a brand new heater & blower fan in the cab, the tires are probably 75%, and it does have a block heater as well. If you're handy with tranny repairs and need a winter project, you can have a nice loader when you're done but all my local repair shops are at least 2 months out so I had to find a replacement beforehand to get ready for winter. It would easily scrap out what I'm asking so my loss is your gain. We used it to feed round bales and move snow last winter and probably didn't put 50 hours on it and I obviously paid much more than I'm asking- just trying to recoup some of my loss. Call if you have any questions. 785-462-0625 I'll be more honest with you than the last owner was with me..... :-)