I HAVE A SHOP  BUILT  FRONT  FRONT REPLACMENT BUMPER GRILLGUARD  ASSEMBLY.  IT IS VERY HEAVY.  IT WILL BOLT DIRECTLY ON THE FRONT OF A 79 SQUARE BODY FORD F-15O  THROUIGH 350.  THE FRAME MOUNTS ARE MADE OF  1/ 2  PLATE. THEY  ARE  DRILLED TO MOUNT ON THE FRAME  USING  HOLES  THAT WERE  IN THERE FROM  THE  FACTORY  WITH 6  1/2''  BOLTS..   IT WILL WORK  AT BACK TO  AT  LEAST  73 FORDS.  YOU WOULD HAVE TO CHECK, IT MAY  WORK BACK  65.  OF COURSE YOU CAN  ALWAYS  REBUILD  THE  MOUNTING  IF  YOU  HAVE A  TORCH  AND  WELDER  AND  MAKE  IT  WORK  ON  ANY THING.  IT  WAS  ON  THE  FRONT  OF  A  79  F-350  FORD  COYOTE  WAGON.  IT  WOULD  ALSO  BE  GOOD  ON  A  FARM  FEED  TRUCK.

THE  BUMPER IS  4" THICK  WALL PIPE  6'  LONG. THE    GRIIE GUARD  UPRIGHTS  AND  THE 2  CROSS  PIECES  ARE   2"  SQUARE TUBING.   IT  HAS  EXPANDED  MESH  IN  THE  MIDDLE.    THE FRAME BRACKET  SPACING IS   43  1/2  INCHES APART.

IT'S AS STRONG AND  WELL BUILT  AS  YOU  WILL FIND,  ALL IT  NEEDS  IS  SANDBLASTED  AND  PAINTED.

I WILL TAKE $100     .      FOR IT.