OMTECH 60W Split Fiber Laser Marking Engraving Machine. Also comes with an 80mm Rotary 3 Jaw Axis, Fume Extractor, extra lenses (160mm, 210mm, 290mm, and (2) 254mm)

Product Information

Laser Source: JPT

Galvanometer Source: Galvo-Tech

Output Power: 60W

Laser Wavelength: 1064 nm

Laser Frequency: 1-4000 kHz

Pulse Width: 2-500 ns

Min. Beam Quality: 1.4

Marking Area: 6.9 x 6.9 in. (175x175 mm)

Max. Marking Speed: 394 ips (10000 mm/s)

Max. Marking Depth: 0.1 mm

Positioning Accuracy: ±0.000004 in. (±0.1 μm)

Est. Laser Service Life (MTTF): 100,000 hr.

Operating Software: EzCad2 for Windows XP, Vista, 7, 8, or 10 (32/64 bit)

Supported Image Formats: .ai, .bmp, .dx, .dxf, .gif, .jpg, .plt, .png, .tga, .tif

Cooling System: Air Cooling

Net Weight: 31kg / 68 lb.

Product Dimensions (L*W*H): 57x35x65cm / 22.4 x 13.7 x 25.5 in.

Package Dimensions (L*W*H): 78X46X57cm / 30.7 x 18.1 x 22.4 in.

Package Weight: 45kg / 99 lb.

Warranty: 2 Years

Package List

1 x 60W MOPA Fiber Laser Engraver

2 x Positioning Bars

4 x Attaching Bolts

1 x Tape Measure

1 x USB Flash Drive with Software

1 x Protective Eyewear

1 x Foot Switch

1 x Power Cable

1 x Set of Hex Wrenches

1 x Tool Box

1 x Instruction Manual

We bought it for our daughter, it has very low hours. It was a bigger learning curve than she was ready to tackle. It works great, there is nothing wrong with it at all. It comes with everything you need to get your projects started. We added a few other things that we purchased (laser spray, galvanized coating). Again everything that you need is included in this purchase. The only thing that you will need is a PC and a burn program, such as Lightburn. To purchase brand new is around $6300.00

Cash or approved check $4500.00 negotiable. 

Call or text 785-754-8235.