This gun can be built as a pistol with a brace or a long barrel rifle. I'm like Burger King, you can have it your way.

🔥 THIS IS THE 9MM PCC BUILD OTHER SETUPS FEAR.

Dominate the Range. Crush Performance. Own the Best.

If you’re done wasting time with parts that almost get it done…
If you want a PCC that hits harder, runs cleaner, and outperforms everything in its class…
Then this is YOUR setup.

Everything below is top‑tier, bomb‑proof, precision‑engineered American hardware — built to run, built to last, built to win.

New Frontier Armory 9mm Lower Receiver  

• Uses Glock Style Magazines
• Machined from 7075-T6 aircraft grade billet aluminum
• Matte black hard-coat anodized per Mil 8625 Type 3 Class 2
• Precision machined magazine well with beveled feed lip for easy mag swaps
• Machined and engraved to be compatible with 45 and 60 degree short throw fire control selectors such as the BAD_ASS ST 45 Lever
• Caliber marking of "Multi" so it can be used with different pistol caliber uppers
• Compatible with most standard AR-15 components and most aftermarket parts
• Take down pin spring and detent hole is threaded for a 6-32 set screw for easy capturing (hardware included)
• Upper tension screw behind grip screw (threaded hole with hardware included) to adjust any “slop” out of vertical fit between upper and lower
• Ambidextrous trigger finger rests with grooves (above and below mag release / mag catch)
• Threaded bolt catch pin (Threaded hole and hardware)
• Integrated large opening "winter" trigger guard

Bear Creek Arsenal Bufferless 9mm upper receiver

Features a 7.5" 4150 Chrome Moly Vanadium barrel with a 1:10 twist rate and a heavy profile and finished off with a 1/2 x 36 pitch threaded muzzle. This is a blow back operated right side charging bolt carrier made from E9310 steel and rides in a billet aluminum upper. No buffer tube means a more compact carry PCC. With the folding stock this slips into a backpack or duffle with ease.

Midwest Industries Handguard

• Extremely rugged, one piece free float design and construction
• Featuring seven sides of M-LOK™ compatible slots
• Inside diameter 1.670 inch, outside diameter 2.0 inch, 1.95 inch over mounting flats
• Made for use with suppressors no larger than 1.55" in diameter
• High quality MIL-STD 1913 top rail, T-marked for accessory location
• One five slot M-LOK™ polymer rail section included
• Barrel nut and barrel nut wrench included
• Construction from 6061 aluminum, hard coat anodized for a lifetime of service
• MI Lifetime Warranty
• 100% Made in America - Keeps America Working
• Also includes a set of metal flip up fiber optic sights

Yankee Hill Machine R9 Direct Thread Suppressor

The R9® offers versatility across multiple hosts at a budget-friendly price plus the durability you’ve come to expect from YHM.

This suppressor excels at suppressing 9mm at high volume (specifically with sub-machine guns and SBRs) and can also handle larger, more powerful calibers including .300 BLK and .308 Win. The R9 can be used with handguns in conjunction with our Nielsen Booster Assembly and accepts our full line-up of HUB mounting options.

Constructed from heat treated 17-4 PH stainless steel. Ships with 1/2”x28 Direct Thread HUB Adapter, 2 suppressor wrenches, and accepts our full lineup of 1-3/8”x24 HUB mounting options.

• Caliber: 9mm
• Weight: 9.3/11oz.w/Direct Thread
• Length: 5.2”/5.5” w/Direct Thread
• Diameter: 1.5625”
• Construction: 17-4 Ph SS
• Mount: 1/2”x28 Direct Thread HUB adapter
• Decibel Rating: 123 dB
• Minimum Barrel Lengths:
  7.62x51/.308 Winchester:16”
  350 Legend: 16”
  6.5 Grendel: 16”
  5.56 NATO: 16”
  300 Blackout: 7.5”
• Full-Auto Rated: Limited
• Made in USA

CNC Warrior Folding Stock

• 416 stainless steel mounting nut is included that cinches the hinge base to the rear of gun by means of a hex wrench tightened from inside the lower receiver. A locking set screw is then tightened to jam the mount in place preventing it from loosening during use.
• Works well with Sig P556 and other AR based guns with short stroke piston based recoil system. Also ideal for use on Meridian Defense "Little Dirty".
• Galil-style' tubular buttstock is included and designed as an integral part of this hinge (not bolted on) and is available in 8 inch (Warsaw) or 9 inch (NATO) length with a left hand swing.
• Precision machined from aircraft aluminum. This hinge is designed to lock up solid, even tighter as wear ensues, and provide years of trouble free use while maintaining its light weight. Includes a hardened steel bushing around the hinge pin to prevent wear, and chrome plated stainless steel spring with ground ends.
•  
• Contoured to match your rear trunnion, this stock provides a nice factory look and installs without the use of any adapters or requiring modifications to your gun.
• All models have an extra deep QD sling swivel pocket on opposite side from fold.
• Finished in Class III black hardcoat.
• All parts and material are MADE IN USA, right down to the spring, pin, and e-clip.

Magpul PMAG-D 50

• Lightweight polymer drum gives 50-round capacity to PCCs designed to use double-stack GLOCK-pattern mags
• Optimized for PCC use to ease firing in prone, or storage when not shooting
• Ratcheting loading lever removes tension from the internal spring, making it easy and faster to load rounds
• Polymer construction keeps drum lightweight, durable and strong and the sturdy stainless-steel internals withstand corrosion and long-term loaded storage with no loss of function, spring fatigue, or reliability concerns
• Easy to verify rounds remaining with the translucent rounds-remaining rear window, high-visibility follower, and capacity indication roller
• Locks bolt back on firearms designed to lock back on GLOCK-pattern magazines
• Paint pen dot matrix for magazine marking

This is an NFA item and requires an NFA background check.